Air Gauge Analog Unit
- Every gauge carries a calibration certificate giving actual values
- Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor
- High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
- Non-contact gauging: long life due to minimal frictional wear
- Two setting Masters: ensures correct magnification of reading at all times
- System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit
- Minimum line pressure required 4.5 bars (67 psi)
- Air consumption 46 LPM
- For diameter 6 mm and above Module-1A air gauge unit is to be used
- For diameter below 6 mm Module-2A air gauge unit is to be used
Features
- 7 segment tri colour LED display
- Air Gauge Can directly connected
- RS-232 serial port for PC connectivity
- Accuracy ±1% FSD
- 0.1μm, 0.5μm, 1μm, Least Count
- Absolute or comparative measurement
- Tolerance limit setting
- 2 LED’s showing status Accept-Reject-Rework
- Built in air regulator for precise pressure
- Auto ID – OD recognition
- Compatible with wide range of Air gauges from leading manufacturers
- Air saving facility as a standard feature for saving costly air
- Optional — 50000 readings storage facility
- LOW MAINTANACE